Skip to content
Menu
Finabase Learn

Funds · Indexes and index funds

How a stock index is built: eligibility, float and the divisor

What decides which stocks enter an index, why only shares the public can buy are counted, and how the divisor keeps the level steady through buybacks and member changes.

On this page
  1. The six steps
  2. Eligibility: two approaches
  3. Float adjustment
  4. The divisor
  5. Price index and total return index
  6. How four well-known indexes differ
  7. Where the rulebook misleads
  8. How Finabase does it
  9. Frequently asked questions
  10. Summary
  11. Check your understanding

A stock index is a published recipe. It says which companies qualify, how many shares of each are counted, and how the total is turned into one number. An index fund does nothing more than follow that recipe with real money, so the rules decide what its holders own. Two funds that both say "large US companies" on the label can hold different stocks in different amounts because their recipes differ.

Most of those rules are public and short enough to read. They fall into three parts: eligibility (who can be a member), float adjustment (how much of each member counts) and the divisor (the arithmetic that keeps the index level from jumping when the membership or a share count changes). This lesson takes them in order and works a small index by hand. The different ways of weighting members are in Index weighting methods: cap, price, equal, fundamental and capped, and the basics of what an index is are in Stock market indexes: S&P 500, Dow, Nasdaq and Russell explained.

The six steps

How a stock index is built, in six steps 1. Universe Every common stock listed on an eligible exchange 2. Eligibility screens Size, liquidity, public float, listing history, earnings (S&P only) 3. Float adjustment Count only the shares the public can buy 4. Weights Price × float shares, divided by the total 5. Divisor Turns total market value into an index level 6. Maintenance Buybacks, mergers, additions: the divisor absorbs them Steps 1 to 3 decide what is in the index. Steps 4 to 6 decide how its value is turned into one number.
The steps every broad stock index goes through. Providers differ most in step 2.

Every provider starts with a universe: usually the common stocks of companies based in one country and listed on a named set of exchanges. From there the rulebook removes what does not qualify, shrinks each survivor to its public float, and assigns weights. The divisor and the maintenance rules then keep the calculation consistent from one day to the next.

Eligibility: two approaches

Rank and take the top N

The Russell US indexes are the plainest example. FTSE Russell's methodology describes them as objectively constructed from transparent rules. On a fixed rank day every eligible US company is sorted by total market value. The largest 4,000 form the Russell 3000E. The first 3,000 are the Russell 3000, the first 1,000 the Russell 1000, and numbers 1,001 to 3,000 the Russell 2000.

The screens applied before ranking are mechanical. In the November 2026 rulebook a stock needs a closing price of at least $1.00 on rank day, a total market value of at least $30 million, and at least 5% of its shares in public hands. Companies in which the public holds less than 5% of the voting rights are also left out. Nobody at the provider decides whether a company "belongs". If it passes the screens and ranks high enough, it is in.

The Nasdaq-100 is rules-based in the same way with a different universe: the 100 largest non-financial companies listed on the Nasdaq exchange. Its 2026 methodology requires average daily trading of at least $5 million over three months and three full calendar months of listing history. It has no minimum float, although the shares counted for weighting are limited to three times the free float.

Published criteria plus a committee

The S&P 500 works differently. It is not the 500 largest US companies. S&P Dow Jones Indices publishes criteria a company must meet to be added, and an Index Committee chooses among the companies that meet them when a place opens.

The size criterion is revised from time to time. Under the guidelines announced on July 1, 2025, a company needs a total market value of at least $22.7 billion to be added to the S&P 500, up from $20.5 billion, and its float-adjusted value must be at least half of that threshold. The same release sets the S&P MidCap 400 range at $8.0 billion to $22.7 billion and the S&P SmallCap 600 range at $1.2 billion to $8.0 billion. S&P's methodology adds a liquidity test, a minimum public float, a period of trading history after an initial public offering, and a profitability test: positive earnings under standard accounting rules over the most recent four quarters combined and in the latest quarter.

Two details matter to fund holders. First, the release states that the criteria are for additions to an index, not for continued membership. A member that shrinks below the threshold or reports a loss is not removed automatically, which keeps turnover low. Second, the profitability test can keep a very large company out for years. Tesla was one of the most valuable US companies before S&P announced on November 16, 2020 that it would join the index that December (Index reconstitution and rebalancing: calendars, buffers and the cost covers what happened to the price).

The committee's discretion is narrow in practice, but it means the S&P 500's membership cannot be predicted from a spreadsheet the way a Russell index's can.

The count on the label is approximate

An index counts companies, a fund holds securities. Alphabet and a few other companies have more than one listed share class in the S&P 500, so the index of "500" companies held 503 stocks on September 30, 2026 according to Vanguard's fact sheet for its S&P 500 ETF, and the fund itself held 505 on that date. Russell reviews each share class of a company separately for inclusion.

Float adjustment

A company's full market value is its share price times all its shares. An index fund cannot buy all of them. Shares held by founders, directors, other companies and governments are not for sale in the ordinary market. If an index weighted such a company at its full value, every fund tracking it would be trying to buy more stock than is available.

Float adjustment fixes this by counting only the shares available to the public. FTSE Russell's rulebook puts it directly: the adjustment excludes the capitalization that is not available for purchase and is not part of the investable opportunity set. S&P applies an investable weight factor between 0 and 1 to each company for the same purpose.

Take a company with 1,000 million shares at $50, of which the founder holds 400 million. Its full value is $50 billion. Its float factor is 0.60, so the index counts $30 billion. A second company with the same $50 billion value and no large holders counts in full, and gets a weight two-thirds larger.

Float is not fixed. When a founder sells, or a lock-up after an initial public offering ends, the float factor rises and index funds must buy. Russell reviews float fully at its June reconstitution and for material changes at other times.

The divisor

Once the members and their float shares are known, the index value is one division.

The divisor has no meaning on its own. It is whatever number makes the index equal its chosen starting level on the first day, adjusted ever since so that only price moves change the level.

A three-stock index, worked

Start with three stocks. A trades at $50 with 100 float shares, B at $20 with 300, C at $100 with 40. Their float values are $5,000, $6,000 and $4,000, a total of $15,000, so the weights are 33.3%, 40.0% and 26.7%. The provider wants the index to start at 1,000:

divisor = 15,000 ÷ 1,000 = 15

Day 1, prices move. A closes at $55, B at $19, C at $104. The market value is 5,500 + 5,700 + 4,160 = $15,360, and the level is 15,360 ÷ 15 = 1,024.00, a rise of 2.40%. Nothing else is needed on a day when only prices change.

After the close, B retires 30 shares it bought back. B now has 270 shares, worth $5,130 at $19. The index market value falls to $14,790 although no price has moved. With the old divisor the level would drop to 986. An investor holding the three stocks lost nothing, so the index must not fall either. The divisor is reset:

new divisor = 14,790 ÷ 1,024.00 = 14.4434

The same evening, C is replaced by D. C leaves with its $4,160. D joins at $30 with 200 float shares, $6,000. Market value becomes $16,630, and the divisor is reset again:

new divisor = 16,630 ÷ 1,024.00 = 16.2402

The level is still 1,024.00. The index did not rise because a bigger company joined.

Day 2, prices move. A closes at $56, B at $19.50, D at $31. Market value is 5,600 + 5,265 + 6,200 = $17,065. The level is 17,065 ÷ 16.2402 = 1,050.79, up 2.62% on the day. Had the divisor never been adjusted, the index would read 17,065 ÷ 15 = 1,137.67, and most of that "gain" would be shares that were added, not money that was made.

A three-stock index: the divisor changes whenever the membership or share count does Step Index market value Divisor Index level Day 0: index starts at 1,000 $15,000 15.0000 1000.00 Day 1 close: prices move $15,360 15.0000 1024.00 After the close: B retires 30 shares $14,790 14.4434 1024.00 After the close: C leaves, D joins $16,630 16.2402 1024.00 Day 2 close: prices move $17,065 16.2402 1050.79
The worked example in one table. The divisor changes twice between the day 1 and day 2 closes; the level does not.

The same mechanism handles share issues, spin-offs, mergers between a member and a non-member, and changes to a float factor. A stock split needs no divisor change in a value-weighted index, because the price halves as the share count doubles. In a price-weighted index such as the Dow Jones Industrial Average, where the "shares" are one of each, a split does change the sum of prices, and there the divisor is adjusted for splits as well.

What a fund does on those days

For the fund the divisor change is not free. To follow the swap from C to D it has to sell C and buy D at or near the closing price on the effective day, along with every other fund on the same index. The index assumes the trade happens at the close with no cost. The fund pays the bid-ask spread and whatever its own buying does to the price. That cost shows up as tracking difference.

Price index and total return index

The level quoted on the news is nearly always a price index: it reflects price changes only and treats dividends as if they vanished. Providers also publish a total return version that reinvests each dividend in the index on the ex-dividend date, by exactly the divisor method above, and for international indexes a net total return version that first deducts the withholding tax a foreign investor would pay. A fund's performance should be set against the total return version, because the fund collects the dividends. Comparing a fund's total return with the headline price index flatters every fund by roughly the dividend yield each year.

How four well-known indexes differ

Rule S&P 500 Russell 1000 Nasdaq-100 Russell 2000
Selection Committee, from companies meeting published criteria Rank by total market value Rank by market value Rank by total market value
Members About 500 companies Largest 1,000 100 largest non-financial Nasdaq listings Ranks 1,001 to 3,000
Size test $22.7 billion to be added (July 2025) Rank only Rank only Rank; $30 million floor
Earnings test Yes, for additions No No No
Float Float-adjusted, minimum float required Float-adjusted, at least 5% public Shares counted up to three times float Float-adjusted, at least 5% public
Full review No fixed date; changes as needed June and December from 2026 December June and December from 2026

Where the rulebook misleads

An index is not an investment. It pays no trading costs, holds no cash, and trades any size at the closing price. Every real fund falls short of it or makes the difference up elsewhere.

Rules change. Russell reconstituted once a year for more than three decades and moved to twice a year in 2026. S&P raises its size thresholds as the market rises. A fund's past record was produced under whatever rules applied then.

Similar names hide different rules. "Total market", "large cap" and "small cap" are defined separately by each provider. The S&P SmallCap 600 applies an earnings test and the Russell 2000 does not, which is one reason funds on the two have returned different amounts (Index reconstitution and rebalancing: calendars, buffers and the cost has the numbers).

Float is an estimate. Providers classify holders as strategic or public using filings that are months old, and they round. Two providers can assign the same company different float factors, and so different weights.

Nothing here tells you whether an index is a good investment. The construction rules describe what a fund will own. They say nothing about what it will return.

How Finabase does it

Finabase does not build indexes or publish membership changes. What it shows is the funds that follow them. Every fund has a symbol page with its quote, chart, news and a Dividends & splits tab, and the Holders tab can show a fund card (issuer, expense ratio, assets, net asset value, holdings and sector weights) when the data feed carries it.

To see the effect of different rulebooks, open a fund's comparison tab and add a fund on another index, for example SPY against IWB and QQQ. The tab rebases each line to its percent change from the first bar in view and tabulates price returns from one week to two years. Those returns exclude dividends, so they correspond to a price index, not a total return index. The screener can be scoped to the S&P 500 and sorted by market cap, and the heatmap sizes each tile by market value, which is a close picture of how a value-weighted index distributes its weight.

Frequently asked questions

Is the S&P 500 the 500 biggest US companies?

No. It is about 500 companies chosen by a committee from those that meet S&P's criteria for size, liquidity, float and earnings. Large companies that fail a test, or that the committee has not yet added, are outside it, and members that have shrunk can stay. The Russell 1000 is closer to a pure size ranking.

Why does the index not jump when a big company is added?

Because the divisor is reset at the same moment. The new divisor is the market value after the change divided by the index level before it, so the level is unchanged by construction. Only subsequent price moves affect it.

Does a share buyback raise a company's weight in an index?

No, it lowers the share count the index uses. The price per share may rise because profit is spread over fewer shares, but the buyback itself reduces the company's float value, and the divisor is adjusted so the index level is unaffected.

What is the difference between full and float-adjusted market value?

Full market value multiplies the price by every share in existence. Float-adjusted value multiplies it by the shares available to public investors, leaving out strategic holdings. Broad US indexes from S&P, Russell and others weight by float-adjusted value.

Can I look up an index's divisor?

Usually not for free. Providers treat current divisors and share counts as licensed data. You do not need the divisor to judge a fund: the fund's holdings and its record against the index's total return are what matter.

Summary

An index is a rulebook with three working parts. Eligibility rules decide the members, either by rank alone (Russell, Nasdaq-100) or by criteria applied by a committee (S&P 500). Float adjustment scales each member down to the shares the public can buy. The divisor converts the members' combined value into a level and is reset whenever a share count or the membership changes, so that the level records price moves and nothing else. A fund that tracks the index must make those changes with real trades, and that is where its costs begin.

Check your understanding

5 questions on this lesson. Each answer comes with the reason, and nothing is scored.

  1. An index stands at 2,000 with a market value of $40,000 and a divisor of 20. After the close a member worth $2,000 is replaced by a company worth $5,000. What is the new divisor?

    1. 20, because the divisor never changes
    2. 21.5, which is $43,000 ÷ 2,000
    3. 22.5, which is $45,000 ÷ 2,000
    Show the answer

    B. 21.5, which is $43,000 ÷ 2,000 The market value becomes 40,000 − 2,000 + 5,000 = $43,000. The new divisor is the value after the change divided by the level before it, 43,000 ÷ 2,000 = 21.5, so the index still reads 2,000.

  2. A company has 500 million shares at $80. A government holds 200 million of them. What value does a float-adjusted index count?

    1. $40 billion
    2. $24 billion
    3. $16 billion
    Show the answer

    B. $24 billion Only the 300 million shares the public can buy are counted: 300 million × $80 = $24 billion. The float factor is 0.60.

  3. Which statement about S&P 500 membership matches the published rules?

    1. It is the 500 largest US companies by market value, re-ranked every quarter
    2. A member is removed as soon as it falls below the size minimum
    3. The size and earnings criteria apply to additions; a committee selects among the companies that meet them
    Show the answer

    C. The size and earnings criteria apply to additions; a committee selects among the companies that meet them S&P states that its criteria are for additions to an index, not for continued membership, and an Index Committee decides which eligible company fills an opening.

  4. A member of a value-weighted index buys back and retires 5% of its shares. Prices do not move. What happens to the index level?

    1. Nothing: the divisor is lowered to match the lower market value
    2. It falls, because the index market value fell
    3. It rises, because buybacks are good for shareholders
    Show the answer

    A. Nothing: the divisor is lowered to match the lower market value A change in share count is not a gain or loss for holders, so the provider resets the divisor and the level is unchanged.

  5. A fund returned 12.0% in a year in which its index’s headline (price) level rose 10.5% and the index’s total return was 12.1%. How did the fund do against its index?

    1. It beat the index by 1.5 points
    2. It trailed the index by 0.1 point
    3. It cannot be judged
    Show the answer

    B. It trailed the index by 0.1 point A fund collects dividends, so it is compared with the total return index: 12.0% against 12.1%. The headline price index leaves dividends out.

Sources and further reading

  1. FTSE Russell — Russell US Equity Indexes, Construction and Methodology, v7.4 (November 2026): eligibility, ranking, float and banding rules
  2. S&P Dow Jones Indices — press release of July 1, 2025: market capitalization eligibility criteria for additions to the S&P Composite 1500 indices
  3. S&P Dow Jones Indices — S&P U.S. Indices Methodology and Index Mathematics Methodology (eligibility criteria, investable weight factor, divisor adjustments)
  4. Nasdaq — Nasdaq-100 Index Methodology (2026 edition): security eligibility, annual reconstitution and weight constraints
  5. Vanguard — Vanguard S&P 500 ETF fact sheet, September 30, 2026: 505 stocks in the fund, 503 in the index
  6. Finabase — worked three-stock example calculated for this lesson