Crypto · Wallets, exchanges and custody
Hot wallets vs cold wallets: which risks each one carries
Where the private key sits when a transaction is signed, which threats reach a hot wallet, a hardware wallet and a multisig setup, and what each leaves exposed.
On this page
"Hot" and "cold" describe one thing about a crypto wallet: whether the device that holds the private key is connected to the internet. A hot wallet is an app on a phone or computer that is online. A cold wallet keeps the key on something that never is, usually a small hardware device.
The difference matters because a private key is the whole of ownership. A transaction signed with it is valid whoever pressed the button, and it cannot be recalled. So the useful question about any wallet is not which is "safest" in general but which threats can reach the key, and which mistakes remain possible even when none can. This lesson works through that question threat by threat. For the basics of keys, wallets and custody, start with Crypto wallets and custody.
The idea: where the key lives
Sending crypto has three steps. A transaction is built ("pay this address this amount"), it is signed with the private key, and the signed result is broadcast to the network. Building and broadcasting need an internet connection. Signing does not: it is arithmetic on two inputs, the transaction and the key.
Wallets differ in where they do the middle step.
In a hot wallet all three steps happen on one device, so the key sits in the memory or storage of a machine that also runs a browser, messaging apps and whatever else has been installed. Mobile wallets, desktop wallets and browser-extension wallets are all hot.
In a cold wallet the steps are split between two devices. An app on the online computer or phone builds the transaction and holds no key; it is often called a watch-only wallet because it can see balances and nothing more. It passes the unsigned transaction to the signing device by USB, Bluetooth, a QR code or a memory card. Bitcoin has a standard file format for this hand-off, defined in BIP 174. The signing device shows the destination and amount on its own screen, the owner confirms with a physical button, and only the signature travels back.
Three kinds of cold wallet are common:
- Hardware wallets: purpose-built devices with a small screen and buttons.
- Air-gapped signers: devices or old phones that never connect by cable or radio and exchange data only by QR code or memory card.
- Paper or metal: a written key or seed phrase with no device at all. This stores a key safely, but spending means typing the secret into something, at which point it is no longer cold.
An exchange account is a different thing again: the exchange holds the keys, and the customer holds a login. That choice is the subject of Crypto exchanges vs self-custody.
Which threats reach which wallet
A threat model is a list of what could go wrong and whether a given setup stops it. The table below is such a list for an individual holder.
Malware and remote attackers
This is the row where hot and cold differ most. Malware on a computer can read files, log keystrokes, swap a copied address on the clipboard, or simply wait for the wallet to be unlocked. A hot wallet's key is on that computer. A cold wallet's key is not, so malware can at most change the transaction that is sent to the device for signing, and the device's own screen shows what is really being signed.
That last point is the whole value of the screen. A hardware wallet used without reading its display protects the key and nothing else.
Phishing and social engineering
Phishing does not attack devices. It asks the owner. A fake wallet update, a fake support agent or a look-alike website requests the seed phrase, and a phrase typed into any online form is gone whichever wallet it came from. A cold wallet offers no defense here, because the phrase is a complete copy of its keys. See Seed phrases for how the phrase works and how it is usually lost.
Approving a malicious transaction
On smart-contract networks such as Ethereum, a signature can do more than send coins. The
ERC-20 token standard includes an approve function that lets another address spend a
holder's tokens up to a limit, which decentralized apps use routinely. A malicious site can
present an approval, or a signature that looks like a login, that hands over tokens.
A hardware wallet will faithfully sign such a request if the owner presses the button. When the device cannot decode a complex contract call it may show only a string of data, a situation known as blind signing. The key stays safe and the tokens leave anyway. Ethereum and smart contracts explains what a contract can be allowed to do.
Loss, damage and theft of the device
A lost phone or a broken hardware wallet is an inconvenience if the seed phrase is safe: the keys are rebuilt on a new device. Hardware wallets also require a PIN, which gives the owner time to move funds if a device is stolen. If the phrase was never written down, or was written down wrongly, the loss of the device is the loss of the coins. The figure calls this "fatal later": the missing backup does no harm until the day the device fails.
The company behind the product
A self-custody wallet does not depend on its maker staying in business. Because phrases follow public standards, the keys can be restored in another compatible wallet. What does depend on the maker is the integrity of the device and its software: a tampered device, a malicious update or a compromised download site are supply-chain risks. Buying directly from the maker, checking packaging and never using a device that arrives already set up are the usual precautions.
A worked example: one holder, three setups
Take a holder with coins worth $20,000 and the same bad week in three different setups. The numbers are invented to illustrate the table.
- All in a browser-extension hot wallet. A fake browser update installs malware that reads the wallet's stored data and captures the password. The attacker signs a transfer for the full balance. Loss: $20,000.
- $1,000 hot, $19,000 on a hardware wallet. The same malware empties the hot wallet. It cannot sign for the hardware wallet. Loss: $1,000, or 5% of the holding.
- The same split, plus a phishing email. The email leads to a page asking for the hardware wallet's recovery phrase "to complete a firmware update". If the holder types it in, the loss is the full $20,000 despite the device. If the holder does not, it stays at $1,000.
The split did what it was designed to do against a technical attack and nothing against a request for the phrase. The third pattern needs no technical skill at all, which is why requests for a recovery phrase are such a common form of theft.
Multisignature and other shared-key setups
Bitcoin's scripting system allows an address to require several signatures. A 2-of-3 multisig has three keys, any two of which can approve a transfer. The keys are typically kept on separate devices in separate places, or one is held by a service that co-signs.
The effect on the threat table is in its last column:
- One stolen key is not enough to move coins.
- One lost key is survivable, since the other two still work.
- A phishing attack must capture two phrases, not one.
The cost is complexity. There are three backups to protect, and restoring the wallet needs information about all three public keys, not just two secrets. Setups that the owner does not fully understand fail in their own way: by locking the owner out. Smart-contract wallets on Ethereum and wallets that split one key into shares among several parties aim at the same goal by different means, and carry the risk of the contract or scheme they rely on.
Pitfalls and limitations
- "Cold" is a property of use, not of the product. A hardware wallet whose phrase is stored in a cloud note is a hot wallet with extra steps.
- Convenience erodes separation. Connecting a cold wallet to many apps and signing frequently exposes it to the approval risk every time.
- Addresses are checked on the wrong screen. Malware changes what the computer shows. The signing device's display is the one that counts, for sending and for receiving.
- Old token approvals stay open. An approval given to a contract years ago remains valid until it is revoked, whichever wallet now holds the key.
- Physical risk moves with the key. Holding keys at home makes the holder, not a company, the target of theft or coercion.
- No protection scheme applies. Coins in any self-custody wallet are not covered by SIPC or FDIC insurance, and there is no chargeback. Money can be lost in full.
The options side by side
| Setup | Key is held | Stops | Still exposed to | Typical use |
|---|---|---|---|---|
| Hot wallet | On an online phone or PC | Exchange failure | Malware, phishing, approvals, own errors | Small, active balances |
| Hardware wallet | On an offline signing device | Malware, remote theft | Phishing for the phrase, approvals | Larger, slower holdings |
| Air-gapped signer | On a device with no link | The same, plus cable-borne attack | The same; more effort per transaction | Long-term storage |
| 2-of-3 multisig | On three separate devices | Any single theft or loss | Setup errors, complexity | Large holdings, shared use |
| Exchange account | By the exchange | Lost phrases, device failure | Hack, freeze, insolvency of the firm | Trading, cashing in and out |
How Finabase does it
Finabase holds no keys and has no wallet, hot or cold. It is a market-data product: the crypto list ranks coins by market value, and each coin has a quote page with a chart and news, such as ETH.X for ether. Nothing on Finabase connects to a wallet or asks for an address, a signature or a recovery phrase, so viewing a price there carries none of the approval risks described above.
The threat table and worked example in this lesson are Finabase Research illustrations. They describe how the designs differ, and they are not a rating of any product.
Frequently asked questions
Is a hardware wallet completely safe?
No. A hardware wallet protects the key from malware and remote attackers, which removes a large class of theft. It does not protect a seed phrase that is typed into a website, and it will sign a harmful transaction if the owner approves it.
Can a cold wallet be hacked?
Not remotely in the usual sense, because the key never touches an online device. Losses with cold wallets come from phished or badly stored recovery phrases, approvals signed without reading, tampered devices and, rarely, physical attacks on a stolen device.
What is the difference between a cold wallet and cold storage?
They are used loosely for the same thing. "Cold storage" often means keys kept offline for long periods and rarely used, including by exchanges and custodians, while "cold wallet" usually means an individual's hardware device.
Do I need both a hot and a cold wallet?
Nobody needs either; it depends on what is held and how it is used. Splitting funds between a small hot balance and a larger cold one limits what a compromised phone or computer can take, as the worked example shows.
Does a watch-only wallet put my coins at risk?
No funds can be moved from a watch-only wallet, because it holds public information only. It does reveal balances and addresses to anyone with access to that device.
Summary
A hot wallet signs transactions on an online device, and a cold wallet signs them on an offline one that returns only a signature. That single difference removes malware and remote attackers from the list of threats to a cold wallet. It leaves three others untouched: a seed phrase given away to a phishing page, a harmful transaction or token approval that the owner confirms, and a backup that turns out to be missing when the device fails. Multisignature setups remove single points of failure and add complexity. None of these arrangements is insured or reversible, so the practical security of any of them is set by how the phrase is kept and how carefully each signature is read.
Check your understanding
5 questions on this lesson. Each answer comes with the reason, and nothing is scored.
What actually crosses between the computer and a hardware wallet when a transaction is signed?
- The private key goes to the computer, which signs and deletes it
- The unsigned transaction goes to the device, and only the signature comes back
- The seed phrase is sent to the network for verification
Show the answer
B. The unsigned transaction goes to the device, and only the signature comes back Signing happens on the offline device. The key never leaves it, which is what keeps malware on the computer away from it.
A holder keeps coins on a hardware wallet and types its recovery phrase into a "firmware update" web page. What protects the coins?
- The device PIN
- The fact that the device is offline
- Nothing: the phrase is a complete copy of the keys
Show the answer
C. Nothing: the phrase is a complete copy of the keys A seed phrase regenerates every key in the wallet on any device. Once it is disclosed, the hardware no longer matters.
Malware changes the destination address shown in the wallet app on a computer. How can a hardware wallet user notice?
- By reading the address and amount on the signing device’s own screen
- By checking the address in the browser a second time
- They cannot; the device signs whatever it receives without showing it
Show the answer
A. By reading the address and amount on the signing device’s own screen The device displays what it is about to sign. The computer’s screen is controlled by the computer, so it is the wrong place to check.
In a 2-of-3 multisignature wallet, one of the three keys is stolen. What can the thief do with it alone?
- Move all the coins
- Move one third of the coins
- Nothing, because two signatures are required
Show the answer
C. Nothing, because two signatures are required Any two of the three keys must sign. One stolen key is not enough, and one lost key is survivable, which is the point of the design.
Why can a cold wallet still lose tokens to a malicious decentralized app?
- Because the app can read the key through the USB cable
- Because the owner can approve a contract to spend the tokens, and the device will sign that approval
- Because cold wallets cannot hold tokens
Show the answer
B. Because the owner can approve a contract to spend the tokens, and the device will sign that approval An approval is a valid instruction signed by the owner. The key stays secret, but the contract now has permission to move the tokens.
Sources and further reading
- SEC Office of Investor Education and Assistance — Crypto Asset Custody Basics for Retail Investors (Investor Bulletin, December 12, 2025)
- Bitcoin developer guide — Transactions (signatures, multisig and pay-to-script-hash)
- BIP 174 — Partially Signed Bitcoin Transaction format (passing an unsigned transaction to a signer)
- ethereum.org — ERC-20 token standard (the approve and transferFrom functions)
- Bitcoin.org — Frequently asked questions (irreversible transactions)
